1. Try to restore the default settings of BIOS
For replacing new hardware, or verifying DMI Pool Data errors may occur due to errors in memory read and write parameters, or setting the hard disk mode, try to restore the default settings of the BIOS, or optimize the settings of the BIOS according to the actual situation.
2. Hard disk data cable problem
The poor quality of the hard disk data cable is likely to cause data transmission errors, and problems may occur if the data cable is in poor contact with the hard disk or motherboard.
Check whether the data cable is intact or try to replace the data cable
3. The content of the main boot area of the hard disk is corrupted
When the content of the main boot area of the hard disk is destroyed by a virus or other program, a verification DMI Pool Data error will appear. You can use
Fdisk/MBR to try to recover.
4. Hardware failure
Hard disk and motherboard hardware failure, or overclocking, etc. will have problems. For problems arising from this aspect, it is recommended to use hardware troubleshooting to check where the problem occurs, and try to replace the hardware suspected to be in trouble to a new platform for more accurate confirmation.
That's a problem with the boot disk! Use the deep mountains and red leaves to go in, and the hard disk partition diagnosis tool will repair the guidance and everything will be OK! I just solved this problem, so I'll tell my friends who are having trouble!
For replacing new hardware, or verifying DMI Pool Data errors may occur due to errors in memory read and write parameters, or setting the hard disk mode, try to restore the default settings of the BIOS, or optimize the settings of the BIOS according to the actual situation.
2. Hard disk data cable problem
The poor quality of the hard disk data cable is likely to cause data transmission errors, and problems may occur if the data cable is in poor contact with the hard disk or motherboard.
Check whether the data cable is intact or try to replace the data cable
3. The content of the main boot area of the hard disk is corrupted
When the content of the main boot area of the hard disk is destroyed by a virus or other program, a verification DMI Pool Data error will appear. You can use
Fdisk/MBR to try to recover.
4. Hardware failure
Hard disk and motherboard hardware failure, or overclocking, etc. will have problems. For problems arising from this aspect, it is recommended to use hardware troubleshooting to check where the problem occurs, and try to replace the hardware suspected to be in trouble to a new platform for more accurate confirmation.
That's a problem with the boot disk! Use the deep mountains and red leaves to go in, and the hard disk partition diagnosis tool will repair the guidance and everything will be OK! I just solved this problem, so I'll tell my friends who are having trouble!